JR.Engineer JOBS IN DAMODAR VALLEY CORPORATION

Go to this website and u can apply online

http://applicationnew.com/dvcje/

The Leaders and the Followers

In 334 BC, more than 35000 soldiers including chief officers and brigadiers of that time followed the instructions of their leader to conquer the world and partially the leader achieved it. He was Alexander the great. The king of Macedonia led his men to realize his dream of getting the entire world under his rule. Though the motive was an egotistic zeal of the king, still his men supported and followed him. In spite of knowing that they would not get the recognition they deserved, they still did whatever Alexander wanted to do them. What magic did Alexander the great perform on his men?

24 years old Napoleon Bonaparte became the brigadier general of the French army in 1793. This was within seven years of his joining into the armed forces. He defeated four Austrian generals in succession. He led around 5,00,000 soldiers against Russia, England and Austria combined forces and eventually won that battle. But that war cost France 3,00,000 casualties and countless sums of money. Despite losing their friends and money in the war, still the French supported Napoleon. What caused them to do so?

Adolf Hitler, one of the powerful dictators of the 20^th century. A lean and short guy who once declared unfit for military services and many times to lead German army finally became the chancellor of Germany. How was that possible?

Mahatma Gandhi was a legal adviser for an Indian firm in South Africa before he guided the Indian masses towards securing independence. Gandhi was literally away from India at least for two decades. As soon as he realized the effect of British rule on Indians and India, he immediately came to India and started the struggle against the British. In no time he became the front line leader for Indian congress. How could people accept a person who was away from the country and not cared for them for decades?

Finally my question is that how and on what basis the followers follow the leaders?

Alexander became a leader as he belonged to a royal family. He was forced to continue his dynasty thus by virtue he learned and adapted leadership qualities. The great philosopher Aristotle was the tutor for him. Aristotle trained Alexander in rhetoric and literature; he stimulated Alexander’s interests in science, medicine and philosophy.

Napoleon was short and lean. To overcome this difficulty he sharpened his mind by mastering mind games. That was how he planned many attacks and won most of them. People believed and followed him through his victories.

Unlike the above two, Hitler was from a middle class family. He lost his father when he was very young. He lost his mother when he was just 19 years old. He was once rejected by German army officials from entering into their army due to his low physical standards. At the age of 21 he was exposed to political literature, later he was deeply hurt by German's defeat in First World War. He thought that Jews had caused Germany’s defeat and decided to join politics to save the country. He attracted thousands of people by his highly provocative speeches. He rose to power very rapidly only by his talking power which he attained by debating with his roommates on several political issues when he was in hostel. People used to gather in large numbers to listen to Hitler’s speeches. He was the foremost fund raiser for Nazi party. They believed in his views, gradually Hitler got support from the people and his co leaders, he became the chancellor. But there were still large number of people who were unable to decide what to do, hence they became neutralistic. There is a global phenomenon that when there are two political forces, the neutralistic people tend to move towards the strongest one. That was what happened in Hitler’s regime in Germany. Thus the seed was sown for the Second World War. The remaining people who opposed with Hitler political views either killed or exiled to remote islands.

Gandhi had a comfortable life till he entered South Africa. He was an avid reader of the works by Leo Tolstoy of Russia and Henry David of America. Specifically Gandhi learned about the passive resistance from the writings of Tolstoy. But all this matter had been in sleeping mode till he got humiliated by white men in South Africa. After completing his work successfully in South Africa by using passive resistance and noncooperation against the government, he returned to India in 1915. When he reached India, there was a lot of hesitation over Indian congress leadership. In 1919 when the parliament passed the Rowlatt acts to crush the Indian revolutionary activities against the British, Gandhi took the charge and demonstrated his dissent by launching Satyagraha which is the part of passive resistance against the British rule. Soon it spread through India gaining millions of followers to Gandhi. It laid the foundation for Gandhi to become a leader to millions of Indians. He soon capitalized on it and organized noncooperation movement against British which was attracted one and all. Indian masses mesmerized by Gandhi’s speeches and his ideas as they were new, different and never heard of, followed him as their undisputed leader.

Alexander had a formal training in philosophy and public speaking from his tutor Aristotle. Napoleon forced to concentrate on philosophy in order to learn battle tactics. He studied his fellow soldiers to master the mind games. Adolf Hitler was vastly exposed to political literature in his early twenties through which he attained complete knowledge about the Europe political scenario. He mastered his public speaking skills by debating on political issues with his roommates when he was in hostel. Gandhi was a lawyer by profession. He had significant practice sessions in England as well as in South Africa through which he learned public speaking skills. Gandhi was understood the psychological aspects of various people through the writings of Leo Tolstoy.

So the fact is that the great leaders were at one time or other practiced various leadership skills intentionally or unintentionally.

All the above leaders enjoyed the loyalty of their followers at good times. But sadly except Alexander, remaining all had their end directly or indirectly due to their detractors. If the history was right, Alexander was died of severe fever. Though he was a great general, Greeks were disagreed and nullified his order of accepting and worshiping him as a god. When Napoleon was defeated in the battle of waterloo on June 18^th 1815, he fled to Rochefort where he surrendered to the captain of the British battleship Bellerophon. Later he was exiled to a remote island in South Atlantic Ocean and he died there like a nobody. When Hitler realized that the defeat of Germany in Second World War was inevitable, he was unable to digest the truth. After knowing the horrible death of his good friend Mussolini, he was scared and committed suicide in the awe of humiliation. On 15^th August 1947, India got the independence and after few months on 30^th January 1948 Mahatma Gandhi was assassinated by Nathu Ram Godsey who was a Hindu fanatic.

After all, leaders are few but followers are many! Why?

Because to become a leader you have to think more thus forcing your brain to work more which most of the people hate to do. But to become a follower you need not to think more thus comforting your brain and yourself from the great danger of thinking.

Before finishing, I am irresistible to ask you one thing,

Are leaders born?

Or

Are leaders made?

I hope you are sure of your answer.

by

TIRUMALA SRINIVAS

GIVE YOUR OPINIONS TO sri_sritirumala@yahoo.co.in OR MESSAGE TO THIS NUMBER 9704153560.

NORTON INTERNET SECURITY 2008

Norton Antivirus 2008:
-we can get 3 years validity by following the readme.txt in the downloaded folder.

download from the below rapidshare link:
http://rapidshare.com/files/323281158/norton.rar

FVD Suite v2.2.8

FLASH VIDEO DOWNLOADER(FVD)

A new version to download videos from you tube.

FVD Suite let you:
- Download video and audio from the social video resources like YouTube, Dailymotion, Break.com and other 200+ video sharing websites;
- Convert video to popular video formats (flv, avi, mpeg, mp4, etc.);
- Сonvert video to audio formats (mp3, wav, ogg);
- Our software is distributed absolutely for free!


FVD Suite offers you the unique opportunity to download videos from such popular Internet resources as YouTube, MetaCafe, MegaVideo, Facebook, and to convert them into files of any audio or video format.

Working with FVD Suite you can download videos quickly and easily and use an independent converter supporting all popular media formats. FVD Suite is software that makes your life easier.

FVD Suite is a downloader that can do much more than other similar programs can! FVD Suite – get video on your PC in just a couple of clicks!

FVD Suite can be used to convert video/audio files of the following formats:

Flv; AVI (DivX, XviD, MJPEG and other codecs); MPEG 1,2, MP4 (H.263, H.264 and other codecs); Windows Media Video (WMV, ASF); as well as MP3, WAV, WMA, OGG, PSP, etc.

Currently supported sites: YouTube (youtube.com), Google Video (video.google.com), MySpace Video (vids.myspace.com), DailyMotion (dailymotion.com), Metacafe (metacafe.com), Break.com (break.com), Blip.tv (blip.tv), Spike (spike.com), MyVideo.de (myvideo.de), YourFileHost (yourfilehost.com) and others.

Download FVD Suite v2.2.8:
http://www.flashvideodownloader.org/fvd-suite/download.php

Kaspersky Anti-Virus

Kaspersky Anti-Virus Updates 13 December, 2009

Download

http://www.scanwith.com/Kaspersky_Anti-Virus_Update_download.htm

This is the latest virus definitions for Kaspersky Anti-Virus Personal and Lite. Use this if you already have AVP installed.

Your PC is under constant attack by viruses, Trojans, Internet-worms and other malware. Kaspersky Anti-Virus Personal monitors all virus entry points leaving you with a clean and safe machine.

Kaspersky Anti-Virus Personal now includes a redesigned interface supported by new architecture. The program is simple to install and use. You only need to choose from three levels of protection and your PC is completely safe.


How to update the Kaspersky Anti-Virus:

Kaspersky Anti-Virus is powered by a unique integrated technology for unknown virus searching, based on the principals of second-generation heuristic analysis.

Because of this, the program is able to protect you from even unknown viruses. By using the integrated Control Center in Kaspersky Anti-Virus Personal, it enables you to create a flexible schedule for the program components to be started and to automatically download and apply updates to your anti-virus databases via the Internet.

Kaspersky Anti-Virus inherits all the strengths of the previous version and adds increased speed and efficiency based on new technologies as well as a more convenient user interface.

One of the important improvements is a powerful heuristic analyzer which when combined with Proactive Defense previously developed by the company's experts is capable of detecting and disabling unknown malicious programs based on their behavior. Thus, Kaspersky Anti-Virus 8.0 provides unique triple protection from all types of malware, known or otherwise, alongside the traditional signature-based method. This kind of multi-tier defense is unparalleled anywhere in the world and of unequalled efficiency.

New Key Features of Kaspersky Anti-Virus 2010 9.0 :

General features

· Check new and changed files option
· Advanced damage clean-up (the windows registry, command files, *.lnk files, hosts)
· Proactive defense module with history and roll-back option
· HTTP traffic checking (AV)
· Outlook Express (AS) and TheBat! plugins (AS,AV)
· Anti-Rootkit technology (Anti-Rootkit)
· E-Mail IMAP and NNTP protocol checking support (AV,AS)
· Registry Monitor with preinstalled and updatable database

Anti-Virus new features

· Advanced damage clean-up (against Spyware)
· Check new and changed files option
· HTTP, IMAP and NNTP traffic check
· ODS Scan suspend technology (when user-activity is detected)
· Startup Scan with updateable database
· Differential update (further reduction of the AV database update size)
· Script-Checker with Internet Explorer GUI plug-in
· New scan scope: Scan Critical Areas task
· Scan Startup Objects – full control of the task execution
· TheBat! plugin
· Ban-list of blocked computers by IDS subsystem (with un-block feature)


What's New in Kaspersky Anti-Virus 2010 9.0 :

• Improvements :
· Implemented support for Microsoft Windows 7.
· Improved methods of dealing with complex threats.
· Improved vulnerability scan, which facilitates security threats' search and elimination in the applications installed on your computer and in operating system settings.
· Improved module of Kaspersky Lab news delivery – News agent.
· Compatibility problems between safe environment and some applications.
• Bug Fixed :
· Problem with system instability after long period of program operation has been fixed.
· Error causing BSOD while updating the emulator driver has been fixed.
· Pop-up message in the URL checking module has been fixed (for the Spanish version).
· Problem with pausing the scan task while third party programs are running in full-screen mode has been fixed.
· Problem with the update task freezing at system startup has been fixed.
· Vulnerability that allowed disabling of computer protection using an external script has been eliminated.
· Driver crash in rare cases while processing a write operation has been fixed.
· Crash while processing data incompliant with the protocol of Mail.Ru Agent has been fixed.

Related downloads:

· Kaspersky Anti-Virus Personal: monitors all virus entry points leaving you with a clean and safe machine.
· Kaspersky Internet Security: is a comprehensive computer defense system from all types of electronic threats...

Electronic projects

For other electronic projects go to the following websites
http://electrosofts.com/ehome/index.html

http://www.electronics-lab.com/

Transmit Infrared Signals Through Walls

Transmit Infrared Signals Through Walls

or
How to turn your IR transmitter into an RF transmitter & control stuff throughout your house

Project update: The Linx Technologies RXM-433-LC modules have been phased out. We still have stock on the 315MHz LC modules, and these will be the ones you receive when ordering parts for this project.

I get "TONS" of requests on how to do this, so I've finally put together this simple project showing you how to use your existing infrared transmitter from any room in the house. The principal is really pretty simple, and it works better than you would think.

This is a "very handy" little project. With this gadget you can control anything from pretty much anywhere. Even place your stereo equipment inside an enclosure then use your existing IR remote control without line of sight. Adjust the volume on your stereo from other rooms in the house. You name it -- so enjoy...;o]

I have tested both circuits with TV's, stereo's, and various VCR's & CD players. I can change channels, adjust volume, etc, from any room in the house (and outside) where I have the IR to RF circuit in Figure #1. The RF to IR circuit in Figure #2 is placed on a bookshelf across our living room, and aimed in the direction of our TV & stereo.

Note: You can place the IRLED on long wires to extend it right onto the front of the equipment you need to control and do away with the Zetex 603 High-Current IRLED drive circuit. I'm a little power hungry, and always like to see just how far I can push the envelope, but you may prefer to tone this down a bit. You can directly drive the IRLED with a single series resistor on the 40kHz modulating PIC for much shorter range operation.

If you're placing the receiver & IR LED close to the equipment you'll be controlling, you do not need the high-current NPN LED driver circuit.

How It Works:

We'll use our existing infrared remote control transmitter for our TV. We'll transmit to the IR detector shown in Figure #1 below. The IR signal from our transmitter is output on the TSOP-1140 40kHz IR detector module data output pin (labeled RX DOUT) in Figure #1.

The IR detectors output signal feeds data to the input of the TXLC-315 RF transmitter module through the 2N3906 PNP transistor inverter circuit. When no data is being received from the IR transmitter, the PNP transistor & TXLC-315 RF module are both OFF.

We need this inverter circuit since the TXLC-315 data input needs to be held at ground during idle (non-transmit) periods. The output of the TSOP-1140 IR detector idles at logic 1. Applying this logic 1 directly to the TXLC-315 data input would cause the TXLC-315 RF transmitter to always be ON. We don't want this. We only want incoming data from the IR transmitter to turn ON the RF transmitter to re-create the same signal the IR transmitter is sending. That's the purpose of the PNP inverter circuit.

In essence, we're simply turning IR into RF since the IR detector output will now modulate our RF module thereby re-creating the same signal, but now it's RF instead of infrared. We use our IR transmitter to send data from any room in the house by installing the circuit shown below in Figure #1 on our TV IR transmitter, or building one of the circuits shown in Figure #1 for each room.

Figure #1: Infrared Receiver to RF Transmitter Circuit

Now all we need is the circuit that receives the RF signal, then re-creates this same data signal in infrared. The circuit shown below in Figure #2 does exactly what we need.

Note: We've revised the RXLC-315 circuit boards. These are now 5-pin VS the old 4-pin boards. We've included a link to the older version board (and old version RF-TO-IR IC) for this project below. Anyone using the newer 5-pin modules & PIC10F200 RF-TO-IR IC, refer to Figure #2.

Figure #2: RF Receiver to Infrared Transmitter Circuit

How It Works:

The RXLC-315 RF receiver module receives the incoming RF transmission from the TXLC-315 transmitter. The RXLC-315 outputs this incoming data stream to the DIN pin of the 8-pin IC labeled RF-TO-IR shown above in Figure #2.

The 8-pin IC is a custom programmed PIC10F200 that samples the data input pin labeled DIN, then re-creates this same data signal modulated at 40Khz. Presto. We now have turned our incoming data back into a modulated IR signal, and we now have a standard TV or other appliance IR transmitter we can use anywhere in the house with our existing stereo, TV, CD players, etc, etc..

To assemble the code below you'll need the Microchip MPASM assembler, a PIC programmer, and, of course, a PIC10F200. If you don't have all this stuff, don't worry, we're tossing in the pre-programmed PIC free of charge with a bunch of other components for this project. See below for details.

You can download the MPASM assembler from http://www.microchip.com/ free of charge. It's included in the MPLAB IDE.

The RF-TO-IR Firmware:

;****************************************************************
;*  Name    : 10F_RFTOIR.asm                                    *
;*  Author  : Bruce Reynolds                                    *
;*  Notice  : Copyright(C) 2005 Reynolds Electronics            *
;*          : All Rights Reserved                               *
;*  Date    : 08/15/2005                                        *
;*  Version : 1.0                                               *
;*  Notes   : Using the PIC10F200 for RF to IR data carrier *
;*          ; generation.     *
;*          : Used for RF to IR project                         *
;****************************************************************
 title           "10F200 - RF to IR Project"
 processor       10F200

 include          

 __CONFIG   _IntRC_OSC & _WDT_OFF & _CP_OFF & _MCLRE_OFF

 movwf OSCCAL  ; load factory osccal value at start-up
     bcf   OSCCAL,0  ; Make sure INTOSC/4 is NOT output on GPIO.2
 movlw b'00000000' ; clear outputs (IR LED = off) on power-up
 movwf gpio  ; set port latches
 movlw b'00001101' ; GPIO.0, GPIO.2, GPIO.3 inputs, GPIO.1 IR LED output
 tris  gpio  ; set I/O directions
 movlw b'11000000' ; internal pull-ups off, wake-up on pin change off
 option   ; write to OPTION register

; Notes on how this works:
;       The output of the RXLC-315 RF receiver is held at ground until the TXLC-315
; transmitter data input transitions from ground to logic 1. The logic 1 input
;       on the TXLC-315 transmitter indicates we're receiving data from the IR transmitter
; and we need to turn the 40kHz carrier on. Simple stuff -- but most effective.

Hold     ; generate 40kHz carrier when GPIO.0 = 1
 bcf    gpio,1   ; LED = off
 btfss  gpio,0   ; Is data input at logic 1..?
 goto   $-1 ; No, then keep waiting 
Freq1
 bsf    gpio,1   ; Yes, so begin 40kHz IR carrier generation
 btfss  gpio,0   ; 2uS
 goto   Hold   ; 3uS
 btfss  gpio,0   ; 4uS
 goto   Hold   ; 5uS
 btfss  gpio,0 ; 6uS
 goto   Hold   ; 7uS
 btfss  gpio,0 ; 8uS
 goto   Hold     ; 9uS
 btfss  gpio,0   ; 10uS
 goto   Hold     ; 11uS
 btfss  gpio,0   ; 12uS
 goto   Hold     ; 13uS (~52% duty-cycle)
 bcf    gpio,1   ; 14uS turn off IR LED here
 btfss  gpio,0 ; 15uS
 goto   Hold     ; 16uS
 btfss  gpio,0   ; 17uS
 goto   Hold   ; 18uS
 btfss  gpio,0 ; 19uS
 goto   Hold   ; 20uS
 btfss  gpio,0   ; 21uS
 goto   Hold     ; 22uS
 btfsc  gpio,0   ; 23uS If gpio,0 = 0 end carrier, else continue
 goto   Freq1    ; 25uS, GOTO requires 2uS, 25uS total=40kHz
 goto   Hold     ; return & wait

 END 

We now have an order button below specifically for the parts for this project. The 8-pin RF-TO-IR IC (which we're including FREE of charge), TXLC-315, RXLC-315, and other components. For your convenience, I have loaded the full schematics for this project on our site below, including the original version using the 4-pin RXLC-315, and newer 5-pin version RXLC-315.

>	Old version HERE in Adobe .PDF format.
>	New version (with PIC10F200) HERE in Adobe .PDF format.

Just right-click one of the links above, then select Save As to save the schematic to your PC.

Can you use other RF modules..? We get this a lot, and the answer is "absolutely", however, I recommend you use a pair that operate similar to the TXLC/RXLC RF modules. The receiver needs to maintain a solid logic 0 during idle or non-transmit periods. Many less expensive RF receivers like the RWS-434 & Ming RE-99 RF receivers will continuously output random noise pulses. These noise pulses will cause the IR modulator IC to send false data to the IR receiver on your existing equipment, so the better RF receiver modules are worth the extra cost. Test it if you like with the less expensive ones, but just remember it "definitely works" with the TXLC/RXLC combination.

Almost too simple, but you'll be really impressed with how well this works. Use the link below to grab all the parts for this project from our Remote Control Store. We have the RF modules, IRLED, IR detectors, 40kHz IR oscillator IC's, ZTX & PNP transistors, etc,,.

Until the next project -- Have fun & don't blown anything up...;o]

Order the main components for this project below.

What's included in this kit..?

	1 x TXLC-315 RF transmitter.
	1 x RXLC-315 RF receiver
	1 x TSOP-1140 IR receiver module (free)
	1 x ZTX603 NPN transistor (free)
	1 x 2N3906 PNP transistor (free)
	1 x PIC10F200 RF-to-IR IC (free)
	2 x IR LED's (our choice, but still free)

Yep. You're reading it right. We're giving you all the additional components for this project for just the cost of the TXLC & RXLC RF transmitter & receiver modules.

Just dig up the resistors, caps, and a +5V regulator required to build the circuits shown above.

GANG LEADER Telugu MOVIE

Screenshots:







Download the movie using the following rapidshare links:

http://rapidshare.com/files/286921417/Gang.Leader.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.001

http://rapidshare.com/files/286921625/Gang.Leader.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.002

http://rapidshare.com/files/286923022/Gang.Leader.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.003

http://rapidshare.com/files/286922141/Gang.Leader.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.004

http://rapidshare.com/files/286922463/Gang.Leader.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.005

DOWNLOAD and enjoy.

DADDY Telugu MOVIE

Screenshots:








Download the movie using the following rapidshare links:

http://rapidshare.com/files/286679362/Daddy.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.001

http://rapidshare.com/files/286694293/Daddy.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.002

http://rapidshare.com/files/286708169/Daddy.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.003

http://rapidshare.com/files/286721475/Daddy.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.004

http://rapidshare.com/files/286736526/Daddy.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.005

http://rapidshare.com/files/286739774/Daddy.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.006

DOWNLOAD and enjoy.

Jagadeka Veerudu Athiloka Sundari MOVIE

Screenshots:




Download the movie using the following rapidshare links:

http://rapidshare.com/files/286932948/Jagadekhaverudu_AthilokaSundari.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.001

http://rapidshare.com/files/286934680/Jagadekhaverudu_AthilokaSundari.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.002

http://rapidshare.com/files/286933124/Jagadekhaverudu_AthilokaSundari.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.003

http://rapidshare.com/files/286933176/Jagadekhaverudu_AthilokaSundari.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.004

http://rapidshare.com/files/286932830/Jagadekhaverudu_AthilokaSundari.500MB.Xvid.By.BUMBLEBEE-AUTOBOTS.avi.005


DOWNLOAD and enjoy.

Telugu movie MURARI

Screenshots:









































































































Download the movie using the following rapidshare links:

CD 1
http://rapidshare.com/files/243411571/Murari.DVD.CD1.bychinnamama.avi.001

http://rapidshare.com/files/243410046/Murari.DVD.CD1.bychinnamama.avi.002

http://rapidshare.com/files/243409952/Murari.DVD.CD1.bychinnamama.avi.003

http://rapidshare.com/files/243409876/Murari.DVD.CD1.bychinnamama.avi.004

CD 2

http://rapidshare.com/files/243410246/Murari.DVD.CD2.bychinnamama.avi.001

http://rapidshare.com/files/243411647/Murari.DVD.CD2.bychinnamama.avi.002

http://rapidshare.com/files/243410845/Murari.DVD.CD2.bychinnamama.avi.003

http://rapidshare.com/files/243411188/Murari.DVD.CD2.bychinnamama.avi.004

After downloading add the two files using HJSPLIT software. You can download this software
from the following link
http://hjsplit.en.softonic.com/free-download-ud#pathbar


DOWNLOAD and enjoy.

Top ten Indian billionaires

Lakshmi Mittal, the London-based steel tycoon, tops the Indian and UK rich lists

Name	Industry	Worth
1. Lakshmi Mittal	Steel	$32bn (£15.6bn)
2. Mukesh Ambani	Petrochemicals	$20.1bn
3. Anil Ambani	Diversified	$18.2bn
4. Azim Premji	Software	$17.1bn
5. Kushal Pal Singh	Property	$10bn
6. Sunil Bharti Mittal	Telecoms	$9.5bn
7. Kumar Birla	Commodities	£8bn
= Ruia brothers	Diversified	$8bn
8. Ramesh Chandra	Property	$6.4bn
9. Pallonji Mistry	Construction	$5.6bn
10. Adi Godrej and family	Diversified	$4.1bn

for latest updates visit the following website
http://business.timesonline.co.uk/tol/business/markets/india/article2126489.ece

Adobe Reader 9.2

Download
Latest Version
http://www.filehippo.com/download_adobe_reader/download/4d1dade060aa8505c64de8389bcc436a/

Adobe Reader software is the global standard for electronic document sharing. It is the only PDF file viewer that can open and interact with all PDF documents. Use Adobe Reader to view, search, digitally sign, verify, print, and collaborate on Adobe PDF files.

• View, print, and search PDF files, including PDF Portfolios and PDF maps
• Author, store, and share documents, and share your screen, using Acrobat.com services
• Experience richer content and greater interactivity with native support for Adobe Flash technology
• Review documents using familiar commenting tools such as sticky notes, highlighting, lines, shapes, and stamps (When enabled by Acrobat Pro or Acrobat Pro Extended)
• Digitally sign PDF documents (When enabled by Acrobat Pro or Acrobat Pro Extended) '

• Title:	Adobe Reader 9.2
  Filename:	AdbeRdr920_en_US.exe
  File size:	26.12MB (27,386,280 bytes)
  Requirements:	Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64

  

Orbit Downloader 2.8.19

Download
Latest Version:
http://www.filehippo.com/download_orbit_downloader/download/44a8c627f3f18a70f2884681d63ac599/

Orbit Downloader, is a download manager specifically designed for the new generation Web (Web 2.0). You can use Orbit to download video/music/files from Myspace, YouTube, Imeem, Pandora, and Rapidshare, or on any site to make general downloading easier and faster.

Main Orbit Downloader Features:

• Download social music, social video and streaming media
• Extreme download acceleration.
• Super Light: micro-sized and resource-friendly
• Supports RapidShare download.
• Supports IE, Firefox, Maxthon, and Opera.
• Supports Metalink download.
• Supports HTTP, HTTPS, FTP, MMS, RTSP and RTMP protocols.
• Supports Proxy server configuration.
• Supports download, pause and resume.
• Provides general download management.

Title:	Orbit Downloader 2.8.19
Filename:	OrbitDownloaderSetup.exe
File size:	2.44MB (2,556,048 bytes)
Requirements:	Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64

Internet Explorer 8.0 (XP)

http://filehippo.com/download_internet_explorer_xp/download/2d93258a03bb875a47b457d1c49fa75f/

Internet Explorer is the world's most popular Web browser. Security, ease of use, and improvements in RSS, CSS, and Ajax support are Microsoft's priorities for Internet Explorer. This version of IE runs on Windows XP.

The latest version of the browser includes support for:

• Accelerators - which allow supported web applications to be invoked without explicitly navigating to them.
• WebSlices - which allows portions of page to be subscribed to and monitored from a redesigned Favorites Bar.
• InPrivate privacy features.
• SmartScreen phishing filter.

Title:	Internet Explorer 8.0 (XP)
Filename:	IE8-WindowsXP-x86-ENU.exe
File size:	16.10MB (16,883,056 bytes)
Requirements:	Windows XP